Construction
| Conductor: | 24 AWG Solid Bare Copper |
| Pairs: | 4 Pairs |
| Insulation: | 0.91 mm HDPE |
| Insulation Colors: | BW/BO,W/O,O,GW,G,GB,WB |
| Rip Cord: | Cotton |
| Out Jacket: | 5.1±0.2 mm PE |
Electrical Characteristics
| Impedance | 1 – 100MHz 100±15 Ohms |
| Insulation Resistance | ＞5000MΩ*KM |
| Dielectric strength | DC 2500V 2S |
| Max.Conductor DC Resistance 20℃ | 9.5 Ohms/100m |
| Res. unbalance (%) | Max. 2.5 |
| Pair to Ground Capacitance Unbalance | 330 pF/100m |
| Transfer Impendance | Max 10 mOhms/m @100Mhz |
| Installation temp. | -30 – 50℃ |
| Operation temp. | -20 – 75℃ |
Application
| • Meets or exceeds requirements of ANSI/TIA-568-C.2 Category 5e and |
| ISO 11801 2nd Edition Class D channel standards. |
| • Meets or exceeds requirements of ANSI/TIA-568-C.2 and IEC 61156-5 |
| Category 5e component standards. |
| • Third party tested to Category 5e channel compliance. |
| • Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications. |
| • Descending length cable markings enable easy identification of remaining cable |
| which reduces installation time and cable scrap. |
| • Color Availability: Additional cable colors available. |
Performance Characteristics
| Frequency | RL (Min.) | Insertion Loss(Max.) | Propagation Delay (Max.) | Delay Skew(Max.) | NEXT (Min.) | PSNEXT (Min.) | ELNEXT (Min.) | PSELNEXT (Min.) |
| MHz | dB | dB/100m | ns/100m | ns/100m | dB | dB | dB/100m | dB/100m |
| 1 | 20 | 2.2 | 570 | 45 | 65 | 62 | 61 | 61 |
| 4 | 23 | 4.2 | 552 | 45 | 56 | 53 | 48 | 48 |
| 10 | 25 | 6.5 | 545 | 45 | 50 | 47 | 41 | 41 |
| 16 | 25 | 8.4 | 543 | 45 | 47 | 44 | 36 | 36 |
| 20 | 25 | 9.3 | 542 | 45 | 45 | 42 | 34 | 34 |
| 31.25 | 23.6 | 11.6 | 540 | 45 | 42 | 39 | 31 | 31 |
| 62.5 | 21.5 | 17 | 539 | 45 | 38 | 35 | 25 | 25 |
| 100 | 20.1 | 22 | 538 | 45 | 35 | 32 | 21 | 21 |
Ordering Information
| Part Number | Type |
| 2231Q08S11 | Cat5e Cable Roll 305m |